The SmallRig Field Monitor Mount Holder review is for camera operators who want to position a 5- or 7-inch monitor directly on a camera cage or handle.
Its cold shoe base and adjustable tilt and swivel make it a focused option for compact rigs, with load limits that vary by tilt angle.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact monitor mount for camera operators who want adjustable viewing angles and a cold shoe connection on a cage or handle.
- Designed to support 5- and 7-inch camera monitors through a cold shoe connection on top of a camera cage or handle.
- Tilts through 180 degrees and swivels through 360 degrees for adjusting monitor position.
- A thumbscrew adjusts tilt tension; swivel tension is adjusted with the included Allen wrench.
- Locating pins on top help secure compatible monitor setups, while a silicone pad helps protect the monitor from scratching and twisting.
Pros
- Offers broad tilt and swivel movement for dialing in a monitor's viewing position.
- Thumb-adjustable tilt tension makes routine angle changes convenient.
Consider before buying
- The load capacity is angle dependent, so a monitor that is within one limit may exceed another at a different tilt.
- Swivel tension requires an Allen wrench, and the knurled 1/4-inch screw should be retightened with the wrench for additional security.
Read the full review summary
This mount combines a cold shoe base, a top 1/4-inch screw and a 1/4-inch threaded hole underneath, giving it several ways to fit into a camera rig.
It tilts through 180 degrees and swivels through 360 degrees, while a thumbscrew adjusts tilt tension without reaching for an Allen wrench.
A wrench is still used to adjust swivel tension and to retighten the knurled screw for added security.
It is best suited to a 5- or 7-inch field monitor that will stay close to the camera and whose mounting weight fits the limit for the selected tilt angle.
Locating pins and a silicone pad are designed to help secure compatible monitors and protect their finish. Buyers should plan the angle and check the appropriate load limit before attaching a monitor.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
A 180-degree tilt range and 360-degree swivel allow substantial repositioning around a camera rig.
Mounting flexibility
The cold shoe base, top 1/4-inch screw and lower 1/4-inch threaded hole support several rig connection paths.
Tilt adjustment access
Tilt tension can be changed with a thumbscrew, while swivel tension requires the included Allen wrench.
Monitor retention features
Locating pins and a silicone pad are useful details for securing a monitor and limiting contact with its surface.
Load guidance
The stated capacity changes with tilt angle, so buyers have concrete limits to check, though the angle-specific figures need attention.
Compactness
At 76 g and a folded size of 78 by 67 by 42 mm, it is a small addition to a camera setup.
Key Features and Specifications of SmallRig Monitor Mount
- Designed to support 5- and 7-inch camera monitors through a cold shoe connection on top of a camera cage or handle.
- Tilts through 180 degrees and swivels through 360 degrees for adjusting monitor position.
- A thumbscrew adjusts tilt tension; swivel tension is adjusted with the included Allen wrench.
- Locating pins on top help secure compatible monitor setups, while a silicone pad helps protect the monitor from scratching and twisting.
- The bottom has a cold shoe adapter and a 1/4-inch threaded hole; the top has a 1/4-inch screw for a monitor or other accessory.
- The stated load limits vary by tilt angle: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees.
- The mount weighs 76 g and folds to 78 by 67 by 42 mm.
Pros and Cons of SmallRig Monitor Mount
Pros
- Offers broad tilt and swivel movement for dialing in a monitor's viewing position.
- Thumb-adjustable tilt tension makes routine angle changes convenient.
- Cold shoe and 1/4-inch connections give it multiple ways to join a camera rig.
- Locating pins and a silicone pad add monitor-focused contact and retention details.
- Compact dimensions and low weight suit rigs where space and carried weight matter.
Consider before buying
- The load capacity is angle dependent, so a monitor that is within one limit may exceed another at a different tilt.
- Swivel tension requires an Allen wrench, and the knurled 1/4-inch screw should be retightened with the wrench for additional security.
- Its design is aimed at compact 5- and 7-inch monitor setups; buyers with another device should check the mounting interface and weight against the stated limits.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider this mount if you want a compact way to put a field monitor on a camera cage or handle and expect to adjust the screen angle during setup.
The 180-degree tilt and 360-degree swivel give useful positioning range, while the thumbscrew makes tilt tension easier to reach than a tool-only adjustment.
Before buying, check the monitor's mounting point and complete rig arrangement, then compare the supported load with the limit for your intended tilt angle.
The lower 1/4-inch threaded hole is useful if your rig calls for a magic arm or stabilizer connection, while the cold shoe base offers a direct mounting route where the cage or handle has a compatible shoe.
The locating pins and silicone pad are particularly relevant if your monitor is compatible with that top interface and you want additional contact points around the screw.
Retighten the knurled screw with the included Allen wrench for the added security recommended for this mount.
Who should skip it
Choose another mounting approach if your setup requires a load beyond the limit for the angle you need, or if the monitor cannot use the mount's top 1/4-inch screw and locating-pin arrangement.
Confirm the interface and planned orientation before building the rest of the rig around it.
This is a poor fit if you need a long extension arm to place the monitor well away from the camera.
Its compact holder form is intended for mounting close to a cage or handle, rather than describing an extended reach.
How the SmallRig Monitor Mount Fits a Camera Rig
Angle control for on-camera viewing
The combination of 180-degree tilt and 360-degree swivel gives operators room to orient the monitor around a camera cage or handle.
Tilt tension is adjusted at the thumbscrew, so changing the viewing angle does not require the Allen wrench; swivel tension remains tool adjusted.
This arrangement suits a rig where tilt is adjusted more often than the mount's rotational resistance.
Load limits depend on the chosen tilt
The supported load is not a single interchangeable figure: the supplied limits are under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees and under 5 lb at 30 degrees.
Compare your monitor and mounting arrangement with the limit corresponding to the angle you plan to use. If you expect to change angles, account for the limit at the most demanding position you intend to use.
Connections and monitor contact
A cold shoe adapter at the bottom makes the holder suitable for a compatible shoe on a cage or handle, and a 1/4-inch threaded hole offers another connection route for accessories such as a magic arm or stabilizer.
The top 1/4-inch screw holds the monitor or another accessory. Locating pins and a silicone pad add contact around that connection, with the pad intended to reduce scratching and twisting.
Small footprint, deliberate setup
At 76 g with a folded size of 78 by 67 by 42 mm, the holder takes little room in a compact rig.
The tradeoff is that setup still calls for attention to tension and fasteners: tilt tension uses the thumbscrew, swivel tension uses the included Allen wrench, and the knurled screw is to be retightened with the wrench for added security.
Alternatives to SmallRig Monitor Mount
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig Camera Monitor Mount 6313
Consider the 6313 if portrait as well as landscape mounting is a central requirement, since its description explicitly includes both orientations.
The Field Monitor Mount Holder is a closer fit if its stated 5- and 7-inch monitor support and angle-specific load guidance match your setup.
- The SmallRig 6313 also offers 180-degree tilt, 360-degree pan and a cold shoe base, and it describes a retractable top locating screw and support for horizontal and vertical monitor installations.
- Its tilt damping adjusts by thumb knob.
- The SmallRig Field Monitor Mount Holder supports 5- and 7-inch monitors, with angle-dependent load limits and a cold shoe base plus a lower 1/4-inch threaded hole.
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Articulating Magic Arm 2066B
Choose the 2066B when you need an articulating arm to position a monitor or accessory farther from its mounting point.
Choose the Field Monitor Mount Holder for a compact, direct camera-rig mount with the specified monitor size range and angle-dependent capacity.
- The 2066B is a 9.8-inch articulating arm with 1/4-inch screws on both ends and double 360-degree ball-head articulation. Its description lists monitors, lights and microphones among compatible accessories.
- The SmallRig Field Monitor Mount Holder is a compact holder that connects by cold shoe or a lower 1/4-inch threaded hole, with 180-degree tilt and 360-degree swivel.
Is SmallRig Monitor Mount Worth It?
The SmallRig Field Monitor Mount Holder is worth considering for a compact camera rig that needs a positionable 5- or 7-inch monitor.
Its range of movement, thumb-adjustable tilt tension, cold shoe base and 1/4-inch connections make it a practical, focused mounting option.
Check the monitor interface and the load limit for your intended tilt before choosing it, and retighten the knurled screw with the included wrench.
If your rig needs portrait-and-landscape mounting or an extended arm, compare those requirements with the alternatives before settling on this holder.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact monitor mount for camera operators who want adjustable viewing angles and a cold shoe connection on a cage or handle.
- Designed to support 5- and 7-inch camera monitors through a cold shoe connection on top of a camera cage or handle.
- Tilts through 180 degrees and swivels through 360 degrees for adjusting monitor position.
- A thumbscrew adjusts tilt tension; swivel tension is adjusted with the included Allen wrench.
- Locating pins on top help secure compatible monitor setups, while a silicone pad helps protect the monitor from scratching and twisting.