The SmallRig Super Clamp is a compact mounting point for cameras and accessories when a tripod is not the most convenient support.
This SmallRig Super Clamp review looks at its adjustable jaw, threaded attachment points, and the practical limits to check before building it into a rig.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A useful fit for camera creators who need a compact clamp mount for rods, shelves, or other surfaces within its jaw range.
- Adjustable jaw opening: minimum 15 mm and maximum about 40 mm, for edges and supports within that thickness range.
- Accessory threads: 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible mounting hardware.
- Broad placement options: intended for use on items such as hooks, shelves, plate glass, crossbars, and other clamps.
- Construction: aluminum alloy and stainless steel.
Pros
- A wide range of potential mounting locations gives the clamp uses beyond a conventional tripod.
- The 1/4-inch and 3/8-inch threads provide options for connecting compatible accessories.
Consider before buying
- The jaw range is limited to surfaces between 15 mm and about 40 mm thick, so measure the intended support first.
- Only the clamp is included; a ball head, arm, or other positioning accessory may be needed for your setup.
Read the full review summary
This clamp combines a jaw that opens from 15 mm to about 40 mm with 1/4-inch and 3/8-inch threaded holes for attaching compatible accessories.
Its aluminum alloy and stainless steel construction, together with rubber pads at the clamp surfaces, make it a straightforward option for mounting to suitable rods, shelves, crossbars, and other firm edges.
It suits photographers and video creators who want a small clamp as a flexible mounting base and already have a compatible accessory head or arm.
The package includes one clamp, so buyers should account for any adapters or positioning hardware they need and check the mounting surface dimensions before ordering.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting versatility
The clamp is designed for a range of mounting surfaces and includes both 1/4-inch and 3/8-inch threaded holes.
Jaw range
Its 15 mm minimum and approximately 40 mm maximum opening cover many smaller rods and edges, while ruling out thicker supports.
Accessory connections
The two thread sizes support a variety of compatible accessories, though the basic package contains the clamp alone.
Surface protection
Rubber pads are intended to help reduce slipping and scratching where the clamp contacts a surface.
Portability
At 0.13 kg and described as compact, it is easy to add to a camera kit.
Load suitability
The supplied maximum weight recommendation is 3.3 pounds, so buyers should plan around that limit and their specific mounting setup.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opening: minimum 15 mm and maximum about 40 mm, for edges and supports within that thickness range.
- Accessory threads: 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible mounting hardware.
- Broad placement options: intended for use on items such as hooks, shelves, plate glass, crossbars, and other clamps.
- Construction: aluminum alloy and stainless steel.
- Rubber contact pads: designed to help prevent the clamp from slipping and scratching the application surface.
- Compact, lightweight form: listed item weight is 0.13 kg.
- Package contents: one super clamp; the listed maximum weight recommendation is 3.3 pounds.
Pros and Cons of SmallRig Super Clamp
Pros
- A wide range of potential mounting locations gives the clamp uses beyond a conventional tripod.
- The 1/4-inch and 3/8-inch threads provide options for connecting compatible accessories.
- Rubber pads help protect contact surfaces and improve grip.
- Compact size and low listed weight make it practical to keep in a camera kit.
Consider before buying
- The jaw range is limited to surfaces between 15 mm and about 40 mm thick, so measure the intended support first.
- Only the clamp is included; a ball head, arm, or other positioning accessory may be needed for your setup.
- The listed maximum weight recommendation is 3.3 pounds, which may constrain heavier equipment or more demanding rigs.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider the SmallRig Super Clamp if you need a compact way to attach a compatible camera accessory to a firm edge, rod, or crossbar.
The adjustable jaw and two thread sizes make it adaptable to different small-rig arrangements, while the rubber pads are useful when the mounting surface needs protection from direct metal contact.
Before buying, measure the support where you plan to use it and confirm that it falls within the 15–40 mm jaw range.
Also check which thread connection your accessory requires and whether you already own any ball head or arm needed to position it. The clamp alone is the full stated package.
Who should skip it
Look elsewhere if your intended mounting surface is thinner than 15 mm or thicker than about 40 mm; it is outside the stated jaw range.
This is a poor fit if your rig needs a higher load recommendation than 3.3 pounds or if you expect the package to include an articulating arm or other accessory.
How the SmallRig Super Clamp Fits a Camera Rig
Check the support before planning the rig
The 15–40 mm jaw range is the first practical filter. Measure the rod, shelf edge, crossbar, or other intended support at the exact clamping point, and consider its shape and firmness as well as thickness.
A surface that falls within the range is a starting point; the supplied information does not establish compatibility with every material or geometry.
Thread options expand placement choices
The 1/4-inch and 3/8-inch threaded holes give the clamp a role as a base for compatible mounting hardware.
That can help place an accessory where a standard camera support is awkward, but the clamp itself does not provide the articulated positioning of an arm or ball head.
Buyers should check the thread size and orientation required by their existing accessory before relying on a direct connection.
Treat the load recommendation as a system limit
A maximum weight recommendation of 3.3 pounds provides a useful boundary for choosing equipment.
The practical arrangement also depends on the accessory, connection, clamping surface, and leverage created by any extension arm, so keep the complete setup within the clamp's stated recommendation and evaluate the mounting point carefully.
Rubber pads add a useful contact layer
The rubber pads are designed to reduce slipping and scratching at the clamp surfaces.
They are a sensible feature for delicate or finished supports, but surface protection still depends on keeping the contact area clean and positioning the clamp evenly.
This matters especially when mounting to surfaces where visible marks would be unwelcome.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
Choose the main clamp if you want a compact threaded mounting base and already have the positioning hardware you need.
Consider this double ball head option when you want an included way to angle an accessory and the added adapter fits your setup.
- This model combines a clamp with a double ball head and a 1/4-inch-20 screw, and includes an action camera mount adapter.
- Its stated maximum weight support is 1.5 kg.
- The SmallRig Super Clamp is a single clamp with 1/4-inch and 3/8-inch threaded holes; its package does not include a positioning arm.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
The main clamp is a simpler fit for buyers who need only a mounting base and whose support is within its narrower jaw range.
Pick the kit if you need a longer adjustable reach and want the arm included.
- This kit pairs a clamp with a 9.8-inch articulating arm and has a wider stated maximum jaw opening of 54 mm, with a 15 mm minimum.
- The SmallRig Super Clamp has a jaw opening of about 15–40 mm and is supplied as a clamp only.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering as a compact, adaptable mounting base for camera accessories, especially when you have a suitable surface and compatible positioning hardware already on hand.
Its thread options and padded jaws give it useful flexibility for small rigs.
Check the support thickness and keep the planned load within the 3.3-pound recommendation.
If you need an arm or ball head in the package, or a jaw opening beyond about 40 mm, a bundled mount kit may fit your setup better.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A useful fit for camera creators who need a compact clamp mount for rods, shelves, or other surfaces within its jaw range.
- Adjustable jaw opening: minimum 15 mm and maximum about 40 mm, for edges and supports within that thickness range.
- Accessory threads: 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible mounting hardware.
- Broad placement options: intended for use on items such as hooks, shelves, plate glass, crossbars, and other clamps.
- Construction: aluminum alloy and stainless steel.